Know Everything About Fiber-Cement Siding

When we look into the price, installation, durability, and material of fiber-cement siding, fiber siding act as an ideal choice for your home that requires a careful balancing act between aesthetic appeal, robustness, upkeep, and price. You might only get two or three of them if you use wood, vinyl, stone, brick, or stucco. But you get all four with fiber cement siding Chicago, a durable blend of wood pulp and Portland cement.

Using Fiber Cement Siding: Why?

It is the only type of siding that combines the benefits of masonry—minimal maintenance, resistance to fire, termites, and decay, and invulnerability to the elements—with the appearance of painted wood clapboards, shingles, or even stone or brick. However, fiber cement costs a tiny fraction of what these other materials do. It makes sense since many TOH TV projects and roughly 15% of new homes are covered in it.
Since the initial introduction of fiber cement, a type of concrete siding, all of this has occurred in just 25 years. The siding is now frequently specified by architects since it keeps prices low without sacrificing beauty. To know more about fiber siding installation cost, please meet one of the best siding companies Chicago here.

What Materials Go Into Fiber Cement?

There are only four components in the basic recipe.
Water: activates and hardens cement; dissolves wood pulp. 

Wood pulp: Increases resilience and flexibility. 

Acts as a filler is fly ash. (Some manufacturers substitute silica sand.)

The materials are joined with Portland cement. made of iron, clay, and limestone.

What is the price of fiber-cement siding?

The most popular type of fiber-cement siding, clapboards, cost between 70 cents to $5.25 per square foot before installation. Prices for shingles range from $2 to $8. Price varies according to size, finish, and the place of sale.

What is the duration of it?

There are a variety of warranties available, from limited lifetime to 25 years. A 15-year warranty against flaking and fading is provided with factory finishes.

What kind of maintenance?

Similar to wood siding, it should be sprayed with a garden hose every six to twelve months, caulked joints should be checked every few years, and foundation plants should be kept in check so that it may dry out.

What You Should Know

Finish

It's necessary to paint or stain fiber cement siding. Before it is put up, either by the manufacturer or by a paint business hired by the lumberyard where you order the siding, or after it is up, this can be done. Manufacturers charge around $1 per square foot and provide a 15-year warranty, but there is a small color selection and just one coat is provided.
Without factoring in the expense of shipping your order to and from the lumberyard, paint shops provide two coats, 25-year warranties, and countless color options for roughly $2 per square foot. The standard warranty period for on-site painters is one or two years.

Trim

Use trim made of cellular PVC or fiber cement for little upkeep. Both can be used as corner, frieze, and fascia boards and are rot-proof. They are available in conventional 34- and 1-inch thicknesses. There are also crown moldings available. Additionally, wood trim is compatible with fiber-cement siding. There should be a caulked 1/8-inch space where the siding and trim meet.

Setting up and installing

Layout

Layout is simple because to the edges of the fiber-cement panels, which butt together. Each course of clapboards and shingles should overlap the one underneath it by at least 114 inches. The exposure is the area that is visible but not overlapped. (A clapboard that is 614 inches broad and has a 114-inch overlap has a 5-inch exposure.) Prior to placing your order, you must choose your exposure because it will affect how broad, how much, and how it will seem after installation.

Installation

Make sure your Chicago siding contractor caulks joints with an exterior-grade sealant that will remain flexible, primes all cuts, and utilizes rustproof stainless steel nails.
Fiber cement must be put at least 6 inches above grade and at least 2 inches above steps, decks, and roofs in order to limit water absorption. Every few years, inspect joints and recaulk as necessary.